150DB Single Trumpet Air Horn Compressor Kit For Van Train Car Truck Boat 12V

Description

Product Information:
This chrome-plated appearance is a single-speaker speaker, and the trumpet is made of metal to ensure better sound quality, maximum strength and durability. Can send out a strong drive stiff, the product includes a maintenance-free heavy-duty 12-volt air compressor, hoses, relays and mounting hardware. It is the perfect choice for you, which can emit loud horns on all vehicles equipped with 12V systems.
Features:
Single Trumpet Train Air Horn Kit (Chrome)
Zinc alloy Trumpet with Metal Base Construction
12V Heavy Duty Air Compressor
Can be mounted on roof, or under the hood
Horn Size: 17" L x 3.74" Dia
Included in this kit:
150DB Single Trumpet Air Horn Compressor Kit For Van Train Car Truck Boat 12V
Product Information:
This chrome-plated appearance is a single-speaker speaker, and the trumpet is made of metal to ensure better sound quality, maximum strength and durability. Can send out a strong drive stiff, the product includes a maintenance-free heavy-duty 12-volt air compressor, hoses, relays and mounting hardware. It is the perfect choice for you, which can emit loud horns on all vehicles equipped with 12V systems.
Features:
Single Trumpet Train Air Horn Kit (Chrome)
Zinc alloy Trumpet with Metal Base Construction
12V Heavy Duty Air Compressor
Can be mounted on roof, or under the hood
Horn Size: 17" L x 3.74" Dia
Included in this kit:
Single Trumpet Air Horn
12V Heavy Duty Air Compressor
4-PIN 12V/30A Pre-wired Relay
3/8" OD Air Hose
Mounting Hardware
?
Specification:
Size:17.72"x3.74"（450×95(dia)mm）
Volt:DC 12V
Current:20.0A
Sound Level:130dB
Operation Air:15-22 PSI(0.1Mpa-0.15Mpa)
Material:Chrome / Chrome Plated ZINC Trumpets(Non-Rusting)
Color:Silver
SAFETY INSTRUCTIONS:
Make sure you never attempt to disassemble this horn kit’s electrical components.
Never use your bare hands to any part of the compressor immediately after or during use.
Avoid operating this product in an area with risk of falling or submergence into a liquid (water).
Do not reach out for or touch any component that has fallen or been submerged into water.
Make sure you set up in areas with good ventilation.
Never sound the air horn anywhere near your ear(s) or that of another person.
Make sure your battery ground is detached before getting your installation started.
Employ equipment for eye protection during drilling operations.
The specific voltage requirement for this horn kit is 12 volt DC, therefore installation must be done to a DC power source of 12 volts.
HORN MOUNTING:
Identify a suitable area for mounting, preferably an unobstructed sheet-metal surface like the frame or body of the vehicle so as to provide a firm platform which will help protect the horn from damage due to excessive shaking. Do not attach the horn to any plastic or other flexible material.
Using the bracket as a guide estimate and mark the positions for the holes and then perforate to size using a drill.
Use the provided mounting hardware to fasten the horn.
COMPRESSOR MOUNTING:
The ideal location for the compressor to be installed is a dry area inside your engine compartment where it will be safe from exhaust and engine manifold heat.
To make the compressor firm and secure, drill a hole of 3/16". IMPORTANT: The compressor must be mounted vertically (with air exhaust port facing downward).
Install the bolt’s head into the compressor housing’s slot. Tighten the compressor firmly to the vehicle with the provided lock washer and nut.
AIR LINE INSTALLATION:
Connect one side of the airline to the compressor’s air exhaust port and the other side to the trumpet's barbed fitting.
Do not make any sharp bends or kinks in the tubing which could alter the sound of the horn or even restrict airflow.
IMPORTANT: Airlines are sometimes already pre-installed. In such situation, ensure that they are inserted entirely into the fittings on the trumpet and compressor.
ELECTRICAL CONNECTIONS (FACTORY HORN SWITCH):
For vehicles with a two-terminal factory horn, transfer the wires to the compressor’s terminals. If the horn doesn’t sound even if the compressor motor turns on, simply reverse the wires.
For vehicles with one-terminal factory horns, make sure you transfer the wire to the compressor’s positive (+) terminal. The negative (-) terminal uses a 16-gauge wire or heavier to connect to ground.
ELECTRICAL CONNECTIONS (NEW HORN BUTTON):
In a dry location, install the relay provided making sure that terminals face downwards near the horn.
Using a 16-gauge wire or heavier, connect PIN 87 of the relay to the positive (+) terminal of the compressor.
Connect PIN 85 of the relay to the horn button (not provided). The other horn button terminal is attached to any rust and paint free metal to ground. Connect using an 18-gauge wire or heavier.
Connect PIN 30 and 86 of the relay to the battery, alternator or other positive (+) of 12-volts. Make sure the wire used is a 16-gauge wire or heavier. Use a 20A fuse (not provided) to protect the electrical circuit.
Item Specifics
Brand :
topcn-autoparts
Manufacturer Part Number :
TOP10808201CN
Type :
Horn
Horn Type :
High Pressure Air
Features :
Quick Release
Material :
Metal
Color :
Silver
Placement on Vehicle :
Left
Fitment Type :
Direct Replacement
Mounting Hardware Included :
Yes
Manufacturer Warranty :
1 Year
Custom Bundle :
No
Modified Item :
No
Surface Finish :
Chrome
Items Included :
Installation Kit
Feature :
ESCP
Shipping
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
3.Local pick up is not available.
4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
5.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
Payment
We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.
Returns
1.All of our brand new items come with a 60-Days money-back guarantee.
2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
5.Shipping& handling cost are not refundable.
6.Man-made damage by abuse or wrong operation is not covered by this warranty.
7.No product liability insurance is assumed.
8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax.
Customer Services
Q: How do I pay for my purchase?
A: MY store accepts PayPal.
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item.
Feedback
1. We will leave positive feedback once we get your payment.
2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
Ignition Coils
complete struts
Radiator Support
Wheel Hub Bearing
Wheel Adaptor
Oxygen Sensor
Towing mirrors
Fuel pump assembly
Lift supports
Starter
Key or key case
struts
floor mats
wheel lug nuts
Cylinder Piston Gasket Kit
Cylinder Head Gasket Sets
CV Axle
Door handle
Radiator
fastener
UTV & ATV Brake System Parts
▷  Brake Pads
♢  Sintered Brake Pads
♢  Kevlar Carbon Brake Pads
◈  Brake Shoes
Regulator Rectifier
blower motor fan
blower motor resistor
suspension kit
◈  suspension kits
◈  suspension cj
◈  suspension gxy
◈  suspension fu
AC Compressor
Brake system
◈  Brake Rotors
◈  Brake Pads
◈  Brake Rotors and Pads
◈  Brake Pad Sensor
◈  Brake Drum
◈  Brake Shoes
◈  Brake Calipers
◈  Brake Calipers & pads
◈  Brake Calipers & Rotors & pads
Car Seat Cover
Air Suspensions
Nerf Bars & Running Boards
Window Switch
Mass Air Flow Sensor-MAF
Window Regulator
Alternator
Leveling Lift Kit
Car Cover
Fuel Injector
Coilover
Car Tools
License Plate Frame
Windshield Wiper Motor
Thermostat Housing
Radiator Coolant Tank
Fuel Tank Pipe
Valve Cover
Door Lock Actuator
Power Steering Pump
Variable Timing Solenoid (VVT)
Electric Water Pump
Timing Chain Kits
Timing Belt Kits
Water Pumps
Oil Pump
Strut Tie Bar
Tire Pressure Sensor
Throttle Body
Harmonic Balancer
Oil Pan
Motorcycle Carburetor & Parts
Urea Pump
Cooling Fan
Cooling Fan Clutch
Oil Cooler
Hydraulic Lifter&Roller Lifter
Suspension+Strut+Bearing
HVAC
ATV Rear Wheel Axle
Parking sensor
Car Antenna
ABS Wheel Speed Sensor
PTO Clutch
Spoilers & Wings
Vacuum Pump
Tensioners
Purge Valve
Knock Sensor
Turbocharger
Crankshaft Position Sensor
Camshaft Position Sensor
MAP Sensor
Oil Pressure Sensor
Throttle Position Sensor
Stator
idle air control valve
Transfer Case Shift Motor
Secondary Air Injection Pump
Running Board Motor
Consoles & Parts
Roof rack
Bumper
Tire Pressure Gauge
Steering Rack
Air Diesel Heater
Engine Mount
Glow Plug
Air Cleaner Filter Box
Ignition Coil Distributor
Cylinder Piston Kit
Pressure Tester Gauge
Jack Stands
Wheel Lug
Sun Visor
Window Visor
trim tilt motor
wiring harness
ATV Brake Caliper
Oil Catch Can Tank
Crankcase Vent Valve
Horns
Steering U-Joint
Fuel Shut Off Solenoid
Fuel Cell Tank
Height Level Sensor
Temperature Sensor
Driveshaft
Air Ride Suspension Valves
Calipers & Rotors
◈  Calipers & Rotors Pads
Radiator Hose
Ballast module
Rubber Seal Strip
Dipstick
Removal Open Tools
Camshaft & Crankshaft
ATV Brake Master Cylinder
Rocker Arm
Battery Switch
Oil Fuel Hose Line
brake Hose Line
LED headlight Assembly
Wheel Hub Bearing Knuckle
headlight motorcycle
Foot Rest Pedal
O Ring
water Pump Impeller
Strut Mount
A/C Expansion Valve
Splash Guards & Mud Flaps
Heater Cores
Evaporators
vehicle speed sensor
RV Water Pump
Fuel Pressure Regulator
Light Bar Mount Bracket
Sensor-8
CV axle+Brake Pads/Rotors
universal spacer
Steering Shaft
transmission filter
Steering Wheel
Steering Wheel Hub
Steering Gear Box
snorkel air intake
CDI BOX
Proportioning Valve
Spindle
Window Glass Hinge
Other Golf Cart Parts
Crankshaft Pulley
Steering Knuckle
4 pcs wheel hub bearing
ATV Tires
Fender Flares
jumper cable
Tonneau Cover
Bug Shield
Front Bumper Lip
dash cover
primary drive clutch
golf
AC Compressor Control Valve+A
carburetor intake mainfold
Fuel Valve& Petcocks
Garden Water Pump
air vent
Windshields
Ignition Wires
Lower Kits & Parts
Cargo Cover
Leaf Springs
Shift Knobs & Boots
Hub Caps
ATV Ignition Switch
fog lights
winch
Jeep Wrangler Headlights
Pivot Brake Clutch Lever
Power Brake Booster
leveling kit + struts shocks
Wheel Rim
Lights
◈  Side/Cab Marker Lights
◈  Instrument Panel Lights
◈  Third Brake Lights
◈  Interior Lights
◈  Exterior Lights
◈  Led Headlights
◈  Special Model Lights
Handlebar Riser
flywheel
Air Dryer
steering knuckle-7
Other
Hot Item
Throttle Body for Dodge Avenger Journey Caliber Jeep Patriot Compass 2.4L 2.0L
USD 46.99
2x Front Hood Gas Lift Supports Struts Shocks Springs For Dodge Ram 02-10 4364
USD 17.69
2x Rear Trunk Hatch Liftgate Lift Supports Springs Struts For Scion tC 2005-2010
USD 16.49
2x Front Hood Lift Supports Shocks Struts For Dodge Ram 1500 2500 3500 4500 5500
USD 16.49
2 For Dodge Challenger 2008-2014 Keyless Entry Remote Control Car Key Fob
USD 20.24
New List Item
For 1980-96 Ford Bronco Pickup Truck Manual Black Steel 5x8'Swing Lock Mirror
USD 26.43
For 1992-1997 Ford F150-450 F-SERIES Manual Mirror Chrome Manual Fold (RH)Side
USD 48.48
2pcs for 2001 Subaru Outback 2.5L Upstream&Down Air Fuel Ratio Sensor Oxygen o2
USD 39.99
Roof Rack Black Cross Bar Luggage For Toyota Highlander 2008-2013 SILVER
USD 66.25
For 2007-2014 F150 Side Trailer Power Heated LED Signal Towing Mirrors Pair
USD 133.99
150DB Single Trumpet Air Horn Compressor Kit For Van Train Car Truck Boat 12V
Product Information:
This chrome-plated appearance is a single-speaker speaker, and the trumpet is made of metal to ensure better sound quality, maximum strength and durability. Can send out a strong drive stiff, the product includes a maintenance-free heavy-duty 12-volt air compressor, hoses, relays and mounting hardware. It is the perfect choice for you, which can emit loud horns on all vehicles equipped with 12V systems.
Features:
Single Trumpet Train Air Horn Kit (Chrome)
Zinc alloy Trumpet with Metal Base Construction
12V Heavy Duty Air Compressor
Can be mounted on roof, or under the hood
Horn Size: 17" L x 3.74" Dia
Included in this kit:
Single Trumpet Air Horn
12V Heavy Duty Air Compressor
4-PIN 12V/30A Pre-wired Relay
3/8" OD Air Hose
Mounting Hardware
?
Specification:
Size:17.72"x3.74"（450×95(dia)mm）
Volt:DC 12V
Current:20.0A
Sound Level:130dB
Operation Air:15-22 PSI(0.1Mpa-0.15Mpa)
Material:Chrome / Chrome Plated ZINC Trumpets(Non-Rusting)
Color:Silver
SAFETY INSTRUCTIONS:
Make sure you never attempt to disassemble this horn kit’s electrical components.
Never use your bare hands to any part of the compressor immediately after or during use.
Avoid operating this product in an area with risk of falling or submergence into a liquid (water).
Do not reach out for or touch any component that has fallen or been submerged into water.
Make sure you set up in areas with good ventilation.
Never sound the air horn anywhere near your ear(s) or that of another person.
Make sure your battery ground is detached before getting your installation started.
Employ equipment for eye protection during drilling operations.
The specific voltage requirement for this horn kit is 12 volt DC, therefore installation must be done to a DC power source of 12 volts.
HORN MOUNTING:
Identify a suitable area for mounting, preferably an unobstructed sheet-metal surface like the frame or body of the vehicle so as to provide a firm platform which will help protect the horn from damage due to excessive shaking. Do not attach the horn to any plastic or other flexible material.
Using the bracket as a guide estimate and mark the positions for the holes and then perforate to size using a drill.
Use the provided mounting hardware to fasten the horn.
COMPRESSOR MOUNTING:
The ideal location for the compressor to be installed is a dry area inside your engine compartment where it will be safe from exhaust and engine manifold heat.
To make the compressor firm and secure, drill a hole of 3/16". IMPORTANT: The compressor must be mounted vertically (with air exhaust port facing downward).
Install the bolt’s head into the compressor housing’s slot. Tighten the compressor firmly to the vehicle with the provided lock washer and nut.
AIR LINE INSTALLATION:
Connect one side of the airline to the compressor’s air exhaust port and the other side to the trumpet's barbed fitting.
Do not make any sharp bends or kinks in the tubing which could alter the sound of the horn or even restrict airflow.
IMPORTANT: Airlines are sometimes already pre-installed. In such situation, ensure that they are inserted entirely into the fittings on the trumpet and compressor.
ELECTRICAL CONNECTIONS (FACTORY HORN SWITCH):
For vehicles with a two-terminal factory horn, transfer the wires to the compressor’s terminals. If the horn doesn’t sound even if the compressor motor turns on, simply reverse the wires.
For vehicles with one-terminal factory horns, make sure you transfer the wire to the compressor’s positive (+) terminal. The negative (-) terminal uses a 16-gauge wire or heavier to connect to ground.
ELECTRICAL CONNECTIONS (NEW HORN BUTTON):
In a dry location, install the relay provided making sure that terminals face downwards near the horn.
Using a 16-gauge wire or heavier, connect PIN 87 of the relay to the positive (+) terminal of the compressor.
Connect PIN 85 of the relay to the horn button (not provided). The other horn button terminal is attached to any rust and paint free metal to ground. Connect using an 18-gauge wire or heavier.
Connect PIN 30 and 86 of the relay to the battery, alternator or other positive (+) of 12-volts. Make sure the wire used is a 16-gauge wire or heavier. Use a 20A fuse (not provided) to protect the electrical circuit.
Item Specifics
Brand :
topcn-autoparts
Manufacturer Part Number :
TOP10808201CN
Type :
Horn
Horn Type :
High Pressure Air
Features :
Quick Release
Material :
Metal
Color :
Silver
Placement on Vehicle :
Left
Fitment Type :
Direct Replacement
Mounting Hardware Included :
Yes
Manufacturer Warranty :
1 Year
Custom Bundle :
No
Modified Item :
No
Surface Finish :
Chrome
Items Included :
Installation Kit
Feature :
ESCP
Shipping
Payment
Returns
Customer Services
Feedback
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
3.Local pick up is not available.
4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
5.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.
1.All of our brand new items come with a 60-Days money-back guarantee.
2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
5.Shipping& handling cost are not refundable.
6.Man-made damage by abuse or wrong operation is not covered by this warranty.
7.No product liability insurance is assumed.
8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax.
Q: How do I pay for my purchase?
A: MY store accepts PayPal.
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item.
1. We will leave positive feedback once we get your payment.
2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.
Copyright of Topcn-autoparts. All rights reserved.