SET OF 2 MACHINIST WORK STOPS MILL (1 LEFT AND 1 RIGHT) LOW PROFILE

Description

IF FOR ANY REASON THESE ARE DAMAGED FROM REGULAR USE, I WILL REPLACE THEM. ( JUST PAY THE SHIPPING TO ME AND I'LL TAKE CARE OF YOU FOR LIFE.)
ONE LEFT HAND SIDE AND ONE RIGHT HAND SIDE
Stops are ONE INCH wide.
They use a 9/64 wrench or .140
PINS ARE .850"  OUT TO THE LEFT ON ONE STOP "  plenty of room so you don't crash  "
AND .850" OUT TO THE RIGHT ON THE OTHER STOP
If you are looking for a stop that gets as far away from the tool as possible and is BELOW the top of the jaw, here it is.
low profile vise stops made from aluminum 6061 and fitted with stainless hardware.
This stop can be used from the left or right hand side.
The pins are both set BELOW the vise jaw.
This lets you machine the edge of any part right down to the jaw.
These are very useful in any kind of set up where you do not want to hit the stop itself with your tool.
My job is to please my customers. In order to do this, I will pay for all shipping costs within the UNITED STATES.
All vise stops are inspected and tested for use. As positive feedback is very important to us, please contact us if you have a question or problem.
Stops will adjust to any standard vise jaw up to 1 inch thick jaw.
The pictures show a 6 inch Kurt and a 4 inch Kurt.
Thank you! and keep us in mind in the future.
Please check out our other tools (in the last picture) including aluminum clamps up to 3 inches long !